Please switch off the electric power to the cooler before performing any cleaning or maintenance.

If the waste water drain is blocked during use, remove the drain try and clean drain pot. Then remove blockage by flushing water under pressure through the drain hole.

After removing back cover, dust out the condenser by blowing air under pressure. This cleaning should be done at least once a year or more frequently if loss in cooling occurs.

While back cover is removed, check that green or yellow earth wire is secured tightly to cooler base.

For the transportation of cooler and during periods when the cooler is not in use, empty the water from tank by first removing the back cover and then opening the drain plug.

Keep the cabinet of the cooler dry to prevent damage due to rust. Wipe off any water spills as soon as possible to protect the base. For added safety, the cooler can be placed on wooden base.